In shop · Single nozzle
Bambu Lab H2S
The largest build volume in the Bambu lineup. Built for big parts, engineering materials, and fast turnaround on demanding prints.
340×320×340 mm build volume — largest of any Bambu printer
Up to 1000 mm/s — 30% faster than the X1 Carbon
65°C heated chamber — eliminates warping on ABS, ASA, PA, PC
Specs
Build volume340×320×340 mm
Max print speed1000 mm/s
Max hotend temp350°C
Heated chamber65°C active
Nozzle systemSingle nozzle
Multi-colorUp to 4 with AMS
Motion accuracy≤50 μm
Sensors23 sensors
What makes it special
Largest build space — print full-size parts that other desktop printers can't fit in a single run
65°C heated chamber — unlocks ABS, ASA, Nylon, PC, and carbon/glass fiber composites without warping
PMSM servo extruder — 67% more extrusion force than stepper motors for consistent high-flow printing
23 sensors + 3 cameras — real-time AI monitoring catches clogs, spaghetti, and failures before they waste a print
Active noise cancellation — operates below 50 dB, suitable for shared spaces
Best for
In shop · Vortek hotend changer
Bambu Lab H2C
Seven materials. Zero purge waste. The H2C's Vortek system swaps hotends instead of flushing filament — cutting multi-color print times in half.
Print up to 7 colors in one run — no purge waste, no sacrificial towers
Vortek hotend swaps in seconds — 2× faster color changes than AMS-only printers
65°C heated chamber — same engineering material support as the H2S
Specs
Build volume325×320×325 mm
Max print speed600 mm/s
Max hotend temp350°C
Heated chamber65°C active
Nozzle systemVortek 6-hotend
Multi-colorUp to 7, zero waste
Motion accuracy≤50 μm
Filament capacityUp to 24 with AMS
What makes it special
Vortek hotend change system — 6 dedicated hotends, each assigned to a specific filament. No cross-contamination, no purging
Zero purge waste — on a 5-color print that took 24hrs on a standard AMS machine, the H2C finishes in under 12hrs
"The Hotend Remembers" — each hotend stores its filament info, so reloads are instant and automatic
65°C heated chamber — same engineering-grade chamber as the H2S, fully enclosed with flame-retardant materials
Up to 24 filaments — expand with multiple AMS units for near-unlimited color and material combinations
Best for